ADL Company displays at ECWATECH 2008, Moscow

      ADL Company takes part in the International Exhibition “ECWATECH” held in June, 3-6, 2008, in International Exhibition Center "Crocus Expo", Moscow. This is the biggest water forum in Eastern Europe, which includes the whole spectrum of equipment and services for water resources conservation and protection, municipal and industrial water supply, sewage treatment, etc.

      ADL Company will display at this exhibition the products of one of its main directions: pump equipment. These are:

• circulators
• vertical pumps;
• submersible pumps;
• horizontal single or multistage pumps;
• centrifugal monoblock pumps;
• dosing pumps;
• pump units;
• high capacity pumps, etc.

      The exposition will include a number of new products, brought to the Russian market by ADL Company in 2007-2008, which are produced both by ADL Company and its European partners.

      ADL Company also presents a new type of pump units GRANFLOW^® (ADL Company production, Russia) based on the horizontal Caprari pumps, type MEC, which is considered to be a unique product on the market as it may be applied both for firefighting and for water-lifting stations.

      There will also be exhibited a new type of circulators Isobar Simflex in energy class A (Smedegaard, Denmark). An A marked circulator assures the energy savings of at least 60 % compared with an average circulator.

      Our exposition will as well include:

• a renewed portfolio from Emotron (Sweden): new generations of variable drives, soft starters and shaft power monitors with updated functions of control and defense of the process;
• control valves with electric and pneumatic actuators, etc.

      All visitors of our stand will as usually be offered all our new technical literature, CDs and competent advice of our specialists.

      Welcome to our stand: № 8 F30.

ADL Company displays at SHK Moscow 2008

ADL Company takes part in the 12th International Specialized Exhibition held in May 12-15, 2008, in CEC “Expocentr”, Moscow.

All visitors of our stand will as usually be offered all our new technical literature, CDs and competent advice of our specialists.

Our stand will display both well-known products and our new directions.

As for the new products it is worth mentioning:

A renewed portfolio from Emotron (Sweden):

new generations of variable drives, soft starters and shaft power monitors with updated functions of control and defense of the process.

A new direction: control valves with electric and pneumatic actuators:

standard ADCA valves (Portugal) are equipped now with PS Automation electric actuators (Germany), which have a wide range of options and quite a reasonable price.

And others

Welcome to our stand: Expocentre, № 7-3 B8

The scheme of the hall is here.

ADL Company displays at AQUA-THERM Moscow 2008

ADL Company takes part in the 12th International Specialized Exhibition held in March 11-14, 2008, in CEC "Expocentr", Moscow.

All visitors of our stand will as usually be offered all our new technical literature, CDs, price-lists and competent advice of our specialists.

Our exposition will include: first on our stand automatic expansion equipment Flamco (the Netherlands), a full dimension range of butterfly valves GRANVAL^® Sigeval type (ADL production, Russia), knife valves Orbinox (Spain), pump units GRANFLOW^® (ADL production, Russia), a varying composition of pumps, control panels GRANTOR^® (ADL production, Russia), instrumentation equipment.

As for the new products there will be exhibited:

• a renewed portfolio from Emotron (Sweden): new generations of variable drives, soft starters and shaft power monitors with updated functions of control and defense of the process;
  
  
• new types of pumps for surface clean waters: trailer-mounted centrifugal tractor pumps type MEC-D, suitable for pumping water in mobile or semi-mobile irrigation systems, and an absolutely new range of standardized single-stage centrifugal pumps type NC which are specially designed so as to comply with the requirements of the industrial sector (firefighting, industrial water supply, etc) and can be used with many different chemically aggressive fluids or ones containing abrasives;
  
  
• news from the German producer of regulating valves Mankenberg: level control valve EB1.59, which is a float-controlled venting and bleeding system with preset vacuum bleeding. EB 1.59 is therefore particularly suitable for water-technological plants subject to vacuum hazards;
  
  
• and others.

Welcome to our stand: Expocentre, № 8 E 902.
The scheme of the hall is here.

New Subsidiary Opened in Irkutsk

ADL Company is glad to announce that we have opened a new subsidiary company in Irkutsk city, one of the most economically developed centers of Siberia. Irkutsk region has a favorable geopolitical and geoeconomical situation, huge natural-resources potential and significant propellant budget (3 largest hydroelectric power stations, Lake Baikal, etc.).

Opening of our subsidiary in Irkutsk will allow to strengthen ADL Company’s position in this region, cooperate more efficiently and without barriers with organizations and enterprises of Irkutsk and the region.

The nearest tasks of the subsidiary in Irkutsk include:
- organizing and holding seminars in Irkutsk regionjn ;
- distributing technical literature concerning all the equipment produced and supplied by ADL Company;
- coordination of activity and help to the local distributors;
- attending, organizing and participation in the local exhibitions and forums;
- other marketing and advertising activities.

For more detailed information about our regional policy, please, consult Regional Policy Section.

Certificates for Buehler equipment (Germany)

Buehler Technologies Gmbh (Germany) is a leading specialist for level and temperature control, coolers, filtration and gas analysis. At the Russian and CIS market Buehler has been represented by ADL Company since 2007.

ADL Company is glad to announce that we have received certificates for the sample gas analysis components of our German partner Buehler. The products certified are compressors and sample gas coolers, needle and directional valves (2 and 3 way, etc.), pressure regulators, controllers, etc.

For more information contact engineers of Measuring Equipment Department.

19.06.07 ADL Company displays at OIL and GAS 2007

ADL Company takes part in the 9-th Moscow International Exhibition taking place from 26 to 29 June, Expocentre Moscow.
Our stand will display both well-known products and our new directions.
Among the products which the Russian market is well-aware about there are:
- gas and liquid analysis systems GRANTEST^® (product of ADL Company);
- solenoid valves and pneumatic equipment ASCO Numatics (the Netherlands);
- ball valves Pekos (Spain) – now up to DN 400;
- knife valves ORBINOX (Spain);
- control panels GRANTOR^® (product of ADL Company);
- frequency inverters and soft starters Emotron (Sweden), etc.

Our new directions will be represented by:
- dew point analyzers Xentaur, Edgetech (USA) – exclusively presented at the Russian market by ADL Company since 2006,
- gas analyzers Teledyne Analytical Instruments (USA), Enotec (Germany);
- gas sample conditioning system components from Buehler (Germany), our partner since 2007,
- coax valves Muller Coax (Germany), produced under the unique technology,
- control valves Mankenberg (Germany), which may be produced specially for your system,
- dosing pumps Milton Roy (France) with a wide range of applications,
- ball valves Flowserve (Germany), different types of materials, DN up to 1200.
All visitors of our stand will as usually be offered all our new technical literature, CDs and competent advice of our specialists.

Welcome to our stand: Expocentre, Pav. 8, hall 1, # 29.
The scheme of our hall is here.

13.06.07 Renewed certificates for Smedegaard equipment (Denmark)

ADL Company is glad to announce that we have received the renewed certificates for pumps and Y-piece manifolds of Dutch firm Smedegaard, which we have been exclusively representing at the Russian market for more than 10 years.

Russian customers are well acquainted with an extensive range of Smedegaard equipment: domestic, commercial and industrial heating pumps, both glandless and glanded, together with chilled water pumps, H.W.S. bronze pumps and pumps for non-aggressive fluids. These pumps are commonly used for heating, conditioning, water supply and fire-fighting systems by different construction firms such as DON-Stroy.

All your questions, please, address to the engineers of Pumps Division.

22.05.07 ADL Company displays at SHK Moscow 2007

ADL Company takes part in the 11-th international industrial and technology trade SHK taking place from 28 to 31 May, Expocentre Moscow.
Our stand will display both well-known products and our new directions. We are glad to present the new products of our own manufacture:
- butterfly valves GRANVAL^® with a new design of handles: this handle is remarkable for its high reliability and durability;
- new types of pump units GRANFLOW^® based on control panels GRANTOR^® for fire-fighting: depending on the settings of the control panel they may be used both for sprinkler and drencher systems. Our new directions will be represented by: measuring equipment Buehler (Germany), control valves Mankenberg (Germany), dosing pumps Milton Roy (France), new generation of frequency inverters FDU 2.0 Emotron (Sweden).
We would like to note that control valves Mankenberg are offered in a wide range of working parameters and cover a great spectrum of applications. So we are always glad to present a new sample of these valves at our fairs and exhibitions, while our specialists are very helpful with the technical information and the choice of the necessary equipment.
Dosing pumps Milton Roy are also well represented with various types of equipment from small pumps for water-treatment to large units used in process industry.
All visitors of our stand will as usually be offered all our new technical literature, CDs and competent advice of our specialists.

Welcome to our stand: Expocentre, № 7-3 В8. The scheme of our hall is here.

22.05.07 Renewed certificates for Flamco equipment (the Netherlands)

ADL Company is glad to announce that we have received the renewed certificates for valves and other equipment of Dutch firm Flamco, which we exclusively represent at the Russian market for quite a long period.
Russian customers know these products very well. Expansion vessels, safety valves, float-valves, separators and other Flamco equipment for heating, cooling, water-supply have been long in operation in Tretyakov Gallery, a complex of buildings Old Square, Bolshoi Theatre, the Audit Chamber of the Russian federation, the Ministry of Foreign affair, Stanislavsky theatre, etc.
All your questions, please, address to the engineers of Common Application Valves Department.

10.04.07 New Certificates of Conformance for Emotron Equipment (Sweden)

ADL Company is glad to announce that we have received new certificates of conformance for the equipment of Swedish company Emotron, which has been our partner for more than 10 years.
The certificate confirms the use of the following types of variable speed drives:

• CF
• FDU
• DFE
• VFX, VFB
• VSA, VSC.

For more information see page Electrical Equipment or contact engineers of Electrical Division.

10.04.07 Coaxial Valves in Russia: ADL Company – Exclusive Distributor of MULLER Co-ax (Germany)

ADL Company is glad to announce that we have become an exclusive distributor of MULLER Co-ax (Germany) – one of the world-leading manufactures of coaxial valves.

For more than 40 years MULLER Co-ax has been producing valves of unique construction and now is the main designer of such valves and the sole patentee of co-ax technology. The coaxial valve design allows – as compared to conventional valves – high pressure media to be controlled at high flow rates. These coaxial valves are available in 2/2 way or 3/2 way versions with threaded or flanged connections. The valves are actuated either by direct-acting solenoid or externally controlled.
Co-ax valves are the embodiment of the highest engineering and manufacture expertise as well as innovative application solutions.

Co-ax valves are used for control, adjustment and check from low to high viscosity, from lubricating to abrasive, from chemically neutral to aggressive media. Co-ax valves come into operation all-round, where uncompromising quality and highest standards are demanded.

Amongst other things they are applied in the following areas:

• process control
• chemical industry
• automotive industry
• environmental technology
• engineering and plant construction.

All products by MULLER Co-ax are certified according to GOST R.
For more information contact engineers of Instrumentation Division.

03.04.07. Electric Actuators Valpes (France) – Efficient Solution!

ADL Company is glad to present in the Russian market our new partner – European manufacturer of high quality equipment – Valpes (France). For over 20 years it has been manufacturing Electric Actuators for automated valves, providing an extensive standard range coupled with the engineering capability to offer custom design services.
This company manufactures a complete range of electric actuators turn for valves from 10 Nm to 1000 Nm for the automation of small-sized industrial valves.
For example, Valpes Electric Actuators make a good fit with butterfly valves GRANVAL^® (ADL Company production) DN up to 200. Besides ADL Company supplies them fully equipped and adjusted. The result is more efficient operation and a good price.
The actuation product line has been developed around three objectives. All the actuators are:
- COMPACT: Good torque weight ratios.
- RELIABLE: All parts are inspected and 100% of actuators are tested to make sure they will perform to customer’s satisfaction.
- COST EFFECTIVE: Better quality, more features at competitive price.


For more information about this equipment see page Actuators.

03.04.07. ADL Company – Exclusive Distributor of Buehler Technologies Gmbh (Germany)!

ADL Company is glad to announce that we have become an official and exclusive distributor of Buehler Company (Germany) on the territory of Russian Federation and CIS, thus expanding the range of supplied equipment.
Headquarters and manufacturing facilities of Buehler Company are located in Ratingen, not far from Frankfurt. The company has a wide net of subsidiaries and distributors all around the world.
For more than 30 years Buehler Technologies Gmbh (Germany) has been a leading manufacturer of special components for sample gas systems. A range of production includes all the base components such as sample probes, sample pumps, coolers, condensate removals, safety flow meters, chemically proof fittings and many others.
For more information contact engineers of Measuring Equipment Department.

27.02.07. Homologation Certificate of Ecological, Technological and Nuclear Inspectors for Mankenberg equipment

ADL Company announces receiving of the Russian ROSTEKHNADZOR Homologation for the following equipment of German company Mankenberg:

• Pressure control valves types DM, DV, RS, UV, VV
• Bleeding and venting valves type EB
• Float valves type NV.
• Steam traps types KA, KE, AXOMAT, NIAGARA.
• Sight glasses and flow indicators type DA
• Filters types SF, GF
• Flow and float switches types NS, SW
• Separators with built-in liquid trap type AS.

This certificate confirms use of this equipment on the territory of the Russian Federation and the fact that it conforms to the engineering requirements specified in the accompanying documentation.

All information about Mankenberg equipment supplied by ADL Company can be found on our website www.adl.ru in the section "Valves". For more information call our engineers of Steam Equipment and Control Valves Department.

13.02.07. ADL Company displays at "AQUA-THERM’2007"

ADL Company will be pleased to welcome you from February 27 to March 2 in Expocentr (M oscow ) in Pavilion 2, Hall 1, Stand A1601 at the 11 th international trade fair for heating and sanitation "A qua-therm' 2007".

Our demonstration stand will include both well-known products (control panels GRANTOR^®, butterfly valves GRANVAL^®, pump sets GRANFLOW^® of our own manufacture) and innovations.

First, it is a new generation of variable speed drives FDU 2.0 and VFX 2.0 from Emotron. These variable speed drives offer full control of your process and ensure a reliable, cost-efficient and user-friendly operation. Controlling your equipment with motor speed brings considerable energy and maintenance savings. Your process is optimized and protected from damage and downtime.

Second, it is a new sector of pump equipment: dosing pumps from Milton Roy, of which ADL became a general distributor in 2006. Milton Roy equipment represents a great variety of electromagnetic, motor-driven, hydraulically actuated dosing pumps with a wide performance and applications range:

Third, ADL Company will gladly present a broad spectrum of Mankenberg valves: pressure reducing, overflow, vacuum, safety, float and other types of valves, which offer a lot of advantages: high quality and reliability, high control accuracy, fastness to staining and to chemically deleterious substances, etc.

15.12.06. Pattern Approval Certificate of Measuring Instruments

ADL Company has acquired the Pattern Approval Certificate of Measuring Instruments for Eurotron infrared thermometers Microray for the following models:

• Pro (-30…+600 °C);
• Xtreme (-30…+1000 °C);
• Auto (-30…+760 °C);
• HVA С (-30…+600 °C);
• Food (-30…+300 °C)

The certificate in question proves that this thermometer type was successfully tested and admitted to the use on the territory of Russian Federation.

All information about infrared thermometers supplied by ADL Company is presented on our website www.adl.ru in the section "Instrumentation equipment". For more information call our engineers of Instrumentation Equipment Department.

09.01.2007. New Subsidiary Opened in Krasnoyarsk

ADL Company is glad to announce that we have opened a new subsidiary company in Krasnoyarsk city, one of the biggest industrial and cultural centers of Western Siberia, the capital of Krasnoyarsk Territory, the second largest region in area extent.

For more than 10 years ADL Company maintains partnership and sales relationships with the biggest industrial enterprises and state organizations of Krasnoyarsk Territory and we hope that inauguration of our subsidiary company will strengthen our relationships and make our cooperation more efficient and fruitful in this region.

The functions of the newly opened subsidiary include:

• organizing and holding seminars in Krasnoyarsk Territory;
• distributing technical literature concerning all the equipment produced and supplied by ADL Company;
• coordination of activity and help to the local distributors;
• attending, organizing and participation in the local exhibitions and forums;
• other marketing and advertising activities;
• For more detailed information about our regional policy, please, consult Regional Policy Section.

05.12.2006. Homologation Certificate of Ecological, Technological and Nuclear Inspectors for Orbinox equipment

ADL Company announces receiving of the Russian ROSTEKHNADZOR Homologation for the following equipment of Spanish company ORBINOX:

• knife valves, types EX, EB, ET, TL, CR, DT, VG, XC, BC
• 3 and 4 way control valves, types 3V, 4V
• check valves, type RM

This certificate confirms use of this equipment on the territory of the Russian Federation and the fact that it conforms to the engineering requirements specified in the accompanying documentation.

All information about Orbinox equipment supplied by ADL Company can be found on our website www.adl.ru in the section "Valves". For more information call our engineers of Common Industrial Valves Department.

05.12.2006. ADL Company became a General distributor of Milton Roy Company (France)

We are very pleased to announce that ADL Company became a general distributor of Milton Roy company – the world leading producer of dosing pumps as well as dry batchers and mixers.

The range of Milton Roy equipment includes well-point and plunger pumps with different drive types and adjustment modes as well as dry batchers, mixers and automatic control systems.

Diversity of materials and liquid end construction of dosing pumps allow pumping highly aggressive chemical solutions. Dosing pumps are designed for continuous service day in and day out and can run dry without any damage to the pump.

A wide variety of accessories are available to meet specific conditions at your installation site such as long lengths of discharge piping, low pressures below 1.5 bar and so on. Accessories include 3- and 4-function valves, check valves, relief valves, damper vessels, calibration pots, etc.

For more information, please, contact engineers of Pump Department.

28.11.2006. Certificate of Conformance for part-turn actuators VALPES Sarl

ADL Company announces receiving of the Russian Certificate of Conformance for part-turn electrical actuators of the French firm VALPES Sarl, types: EK, ER, VR, VS, VT for valves.

ADL Company supplies actuators both installed and apart. Our engineers are always ready to help you choose the right actuator for your valve and to provide you with all the documentation necessary.

All information about actuators supplied by ADL Company is presented on our website www.adl.ru in the section "Actuators". For more information call our engineers of Industrial Valves Department.

NOW WWW.ADL.RU SPEAKS ENGLISH!

ADL Company would like to inform you about launching an English version of the corporate website www.adl.ru.

Now our English speaking partners and their representatives in Russia have get access to the complete information about our company, its activities and products as well as actual news, which will be published practically at the same time as the Russian ones.

You can find an English version using a link ENGLISH VERSION at the first page of the Russian website.

At the nearest time is expecting to fill the English website with more detailed technical information about ADL products and also additional services, which are available at our Russian website.